Panasonic KX-TCD725EM

Base Unit Ringer Volume
58
Selecting the Base Unit Ringer Volume
4 levels (HIGH, MEDIUM, LOW, OFF) are available. The factory preset is MEDIUM. When set to OFF,
the base unit will not ring.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
1 Press .
2 Press or until the arrow points
to “
Setting Base ”, then press .
• “ Input Command ” is displayed.
3 Press TWICE.
• The current ringer volume is displayed.
1: LOW 2: MEDIUM 3: HIGH 0: OFF
2
4 Select your desired ringer volume 0
through 3 with dialling button
through .
• Each time you press a button, the selected
volume level is displayed and rings.
Ex. 3 (HIGH) is selected.
5 Press .
• A beep sounds.
• The display will return to “ Setting
Base
”. To return to the standby mode,
press .
3
0
Input Command
1222537590
KX-TCD725EM-3(38~64) 01.7.19 10:42 PM Page 58