72
Answering System Operations
Recording Your Telephone Conversation Using the
Handset
You can record a telephone conversation.
1 During a conversation, press then
.
•
“
Recording
” is displayed on the handset.
2 Continue your conversation.
3 When finished, press then .
•
When you record your 2-way telephone
conversation, you should inform the other
party that the conversation is being recorded.
•
A beep sounds every 15 seconds.
Setting the VOX SENS Function
The VOX SENS function is preset is 1 (HIGH). If the unit continues to operate after a caller hangs up
or there are long pauses between or after messages, set to 2 (LOW).
1 Press .
2 Press or until the arrow points
to “
Setting Base
”, then press .
•
“
Input Command
” is displayed.
3 Press .
•
“
Remote Operation
” is displayed on
the handset.
5 Press .
6 To set to LOW, press .
OR
To set to HIGH, press .
•
The setting is displayed.
7 Press .
•
The display will return to “
Setting
Base
”. To return to the standby mode,
press .
To Next Page
Loading...
