Panasonic KX-TCD725EM

48
Display Option
1 Press .
2 Press or until the arrow points to
“
Setting Handset ”, then press .
3 Press or until the arrow points
to “
Display Option ”, then press .
4 Press or until the arrow points to
“
Select Language ”, then press .
• The current setting is at the arrow.
5 Press or to select the desired
language, then press .
• A beep sounds.
• The display will return to “ Select
Language
”. To return to the standby
mode, press or wait for 60
seconds.
• You can exit the programming mode any time
by pressing .
Selecting the Display Language
You can choose one of 16 display languages. The factory preset is German.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
KX-TCD725EM-3(38~64) 01.7.19 10:42 PM Page 48