Panasonic KX-TCD725EM

Answering System Operations
68
To erase your own greeting
message with function menu
1 During playback your own greeting
message, press .
2 Press or until the arrow points
to “
Erase OGM ”, then press .
3 Press or to select “ Yes ”, then
press .
• A recorded your own greeting message is
erased.
• The display will return to “ Remote
Operation
”. To return to the standby
mode, press or wait for 30
seconds.
To erase your own greeting
message with direct command
1 During playback your own greeting
message, press .
2 Press then .
• A recorded your own greeting message is
erased.
• The display will return to “ Remote
Operation
”. To return to the standby
mode, press or wait for 30
seconds.
6
To set the answering system
ON/OFF
See basic answering system operations
(p. 13).
1 Press (INT) then .
2 Press to set ON, or press to set
OFF.
• “ [A] ” is displayed if set to ON.
• The display will return to “ Remote
Operation
”. To return to the standby
mode, press or wait for 30
seconds.
0
8
To playback your own greeting
message
1 Press (INT) then .
2 Press or until the arrow points
to “
Play OGM ”, then press .
OR
Press .
• A recorded your own greeting message is
played back.
• If your own greeting message is not
recorded, one of 2 pre-recorded greeting
messages is played back.
• The display will return to “ Remote
Operation
”. To return to the standby
mode, press or wait for 30
seconds.
6
KX-TCD725EM-4(65~85) 01.7.19 10:23 PM Page 68