Panasonic KX-TCD725EM

To record a memo message
with function menu
1 Press (INT) then .
2 Press or until the arrow points to
“
Record ”, then press .
3 Press or to select “ Record
Memo
”, then press .
4 After the long beep, talk clearly, about
20 cm away from the MIC (microphone)
on the handset.
• During recording, the arrow points to
“
Stop ”.
5 When finish recording, press .
• A beep sounds.
• The display will return to “ Remote
Operation
”. To return to the standby
mode, press or wait for 30 seconds.
70
To record a memo message
with direct command
1 Press (INT) then .
2 Press then .
3 After the long beep, talk clearly, about
20 cm away from the MIC (microphone)
on the handset.
• The display will start showing the length of
the recording time.
4 When finish recording, press .
• A beep sounds.
• The display will return to “ Remote
Operation
”. To return to the standby
mode, press or wait for 30
seconds.
9
4
7
Record
Answer ON
H
Stop
To erase all incoming/memo
message(s) with function menu
1 Press (INT) then .
2 Press or until the arrow points
to “
Erase All Msg ”, then press .
3 Press or to select “ Yes ”, then
press .
• All incoming/memo message(s) is/are
erased.
• The display will return to “ Remote
Operation
”. To return to the standby
mode, press or wait for 30
seconds.
To erase all incoming/memo
message(s) with direct command
1 Press (INT) then .
2 Press then .
• All incoming/memo message(s) is/are
erased.
• The display will return to “ Remote
Operation
”. To return to the standby
mode, press or wait for 30
seconds.
5
Answering System Operations
Remote Operation
74
00-00
KX-TCD725EM-4(65~85) 01.7.19 10:23 PM Page 70