Panasonic KX-TD500 - Trunk Route Control

General Features
110 Features Guide
Trunk Route Control
Description
Allows the Manager and the Operators to make a call using a specific trunk.
They can verify the status of the specified trunk.
Conditions
• Executive Busy Override
When the outside call made using a specific trunk is busy on another call, the Manager or
the Operators can join the existing outside call by dialing "2" after hearing a busy tone. This
feature is only available for the extension allowed by COS programming <Section 2.4 Class
of Service (COS), "Busy Override" in the Programming Guide>.
Programming Guide References
• 2.3 Numbering Plan
– Trunk Route Control
• 2.4 Class of Service (COS)
– Busy Override
Features Guide References
1.6 Originating Features
• Executive Busy Override
User Manual References
• 4.4.13 Trunk Route Control