Panasonic KX-TD500 - System Data Default Set

General Features
96 Features Guide
System Data Default Set
Description
This system permits re-initialization of system-programmed data. Starting up the KX-TD500
system with default values can be done using the Operation Switch (MODE) on the CPU card
<Section "2.10.2 CPU Rotary-Switch Features" in the Installation Manual>.
Conditions
• The default setting for each programming item is listed in Section "12 Default Values" in
the Programming Guide.
Installation Manual References
• 2.10.2 CPU Rotary-Switch Features
Programming Guide References
System Programming is not required.
Features Guide References
None
User Manual References
Not applicable.