Panasonic KX-TD500 - Ringing Tone Selection

General Features
290 Features Guide
Ringing Tone Selection
Description
Allows the DPT user to select one of eight ringer frequencies for each line access button (ICM,
CO, DN). This is useful to distinguish the type of incoming calls by ringing.
Conditions
None
Programming Guide References
• 4.3 Extension Line
–COKey
• 4.4 DSS Console
–DSSKey
Features Guide References
1.13 Audible Tone Features
• Ringing, Discriminating
1.16 Button Features
• Button, Line Access
User Manual References
• 2.2.3 Flexible Button Assignment
• 2.2.13 Ringing Tone Selection for CO Buttons
• 2.2.14 Ringing Tone Selection for INTERCOM Button
• 3.2.5 [005] Flexible CO Button Assignment