General Features
202 Features Guide
1.7 Dialing Features
Automatic Station Release
Description
If the extension user fails to dial any digits within a specified time period after going off-hook,
the user will be disconnected from the line after a reorder tone is sent. To get a line again, the
user must go on-hook first and then go off-hook.
Conditions
• This function works in the following cases:
When making a call
(1) The first digit has not been dialed within 10 seconds.
(2) After a digit is dialed, the next one is not dialed within 10 seconds (Intercom
call only).
Programming Guide References
System Programming is not required.
Features Guide References
1.7 Dialing Features
• Pickup Dialing (Hot Line)
User Manual References
Not applicable.
To Next Page
Loading...
