Panasonic KX-TD500 - Transferring Features; Call Forwarding

General Features
Features Guide 251
1.11 Transferring Features
Call Forwarding
Description
Allows you to have incoming calls to your extension forwarded to a specified destination. You
may specify the circumstances under which your calls are forwarded. The following Call
Forwarding features are available:
Conditions
[General]
• Types of calls which are forwarded by these features are:
Type Circumstance Destination
All Calls Any time regardless of the status of your
extension.
A specified extension
Busy When your extension is busy.
No Answer When you do not answer the call within
a pre-determined time.
Busy / No Answer When your extension is busy or you do
not answer the call within a pre-
determined time.
Follow Me When you forget to set forwarding "All
Calls" before you leave your desk, you
can set the same function from the
destination extension.
To CO / TIE Line Any time.
A specified outside party
No Answer to CO /
TIE Line
When you do not answer the call within
a pre-determined time.
Call Type
Outside calls Direct In Lines (DIL) 1:1;
Direct Inward Dialing (DID);
Direct Inward Dialing (DID) (ISDN);
Direct Inward System Access (DISA);
Intercept Routing;
Multiple Directory Number (MDN);
TIE;
Transfer*