General Features
294 Features Guide
- External in this order.
For example, if Paging - External is overridden by TAFAS, a reorder tone is returned to the
performer of the Paging - External. If BGM is overridden by another higher priority, it is
interrupted and starts again when the higher priority is finished.
[All], [Group]
• A maximum of 16 station paging groups, each consisting of one or more extension groups,
can be created in the system <Section 3.4 Paging Group in the Programming Guide>.
• A single Extension Group cannot belong to two or more different Paging Groups at a time.
• To page extensions, paged extensions must belong to some extension group(s), and this /
these extension group(s) must belong to some paging group(s).
• A ringing or busy PT extension cannot receive a paging announcement.
[Deny]
• Distinctive Dial Tone
When this feature is assigned to the extension, the extension user may hear a distinctive dial
tone (dial tone 2) after going off-hook depending on System Programming <Section 2.8
System Option, "15. Special dial tone after setting feature" in the Programming Guide>.
Installation Manual References
• 2.8.1 External Pager (Paging Equipment)
Programming Guide References
•2.2Tenant
– External Paging Tone
– Confirmation Tone for Station or External Paging
• 2.3 Numbering Plan
– External Paging
– External Paging Answer / TAFAS Answer
– Station Paging
– Station Paging Answer
– Paging Deny Set / Cancel
•2.8SystemOption
– Confirmation tone for Call Pickup, Paging, Paging- Answer, TAFAS-Answer, Hold
Retrieve and Call Park Retrieve
– Special dial tone after setting feature
• 3.4 Paging Group
– Paging Group No.
– Extension Group No.
Features Guide References
None
To Next Page
Loading...
