Panasonic KX-TD500 - Page 352

ISDN Features
352 Features Guide
Flow chart of required programs for ISDN
Conditions
None
BRI PRI
P-PP-PP-MP
Select "P-P" or "P-MP" as Access
Mode in program
1.2 Slot Assignment
(BRI Card Properties).
Assign ("Digit to receive DID,"
"[DID / TIE] Digits to delete"
and "[DID / TIE] Number to be
added") according to the contract
with the Central Office in program
4.2 Trunk Line.
Assign the "DID / MDN No."
and the "Destination" so that the
"DID / MDN No." can be
directed to a specific destination in
program 9.2 DID Dial Registration.
Select "MDN" as Incoming Type in
program 4.2 Trunk Line.
Select "DDI" as Incoming Type in
program 4.2 Trunk Line.
DID (ISDN)
MDN
Is there a DID (ISDN)
contract with the Central
Office?
Yes
Assign the "Destination" in
program 4.2 Trunk Line.
No