Panasonic KX-TD500 - Page 372

TIE Line Features
372 Features Guide
Programming example:
To make up the TIE Line Network above, the following System Programming is required at
PBX-1 and -2 respectively.
PBX-1
•2.3NumberingPlan
– (01) 1st Hundred Block Extension: 10
– (77) Other PBX 01: 2
• 8.2 TIE Routing Table
• 9.2 DID Dial Registration
PBX–2
•2.3NumberingPlan
– (01) 1st Hundred Block Extension: 20
– (77) Other PBX 01: 1
• 8.2 TIE Routing Table
Conditions
• Trunk to Trunk Restriction
Used to allow or restrict trunk-to-trunk path connection. To permit the TIE caller to make
a CO call via the TD500 System, the Trunk Group used for this purpose should be allowed
to relay the call by System Programming.
No. Leading
Digit
Digitsto
delete
Number to
be added
Trunk Group No.
01 02 03 04 05
01 2XX 0 10
DID/MDNNo.
(Max. 16 digits)
Destination
(Day)
Destination
(Night)
Name
(Max. 10 characters)
1234567 2000 2000
No. Leading
Digit
Digitsto
delete
Number to
be added
Trunk Group No.
01 02 03 04 05
01 1XX 0 10