Panasonic KX-TDA100

3.3 [1-1] Slot—Card Property - MPR
MEC/EMEC card properties can be viewed and set.
Memory Expansion Card:
Indicates
whether
an MEC (KX-TDA30/KX-TDA100/KX-TDA200) or EMEC (KX-TDA600) card is mounted on
the MPR (KX-TDA30/KX-TDA100/KX-TDA200) or EMPR (KX-TDA600) card.
To change the EMEC or MEC card installation status, click on this cell, then click OK in the dialogue box that
appears. Clicking on the Command button performs the same function. (This operation is only available in
batch mode.)
Removing the EMEC or MEC card here also deletes related EMEC or MEC card data.
Note that when an EMEC or MEC card is installed in the PBX, any SMDR data stored in the PBX is cleared.
Value Range
None, Installed
Maintenance Console Location
3.3 [1-1] Slot—Card Property - MPR
Installation Manual References
For KX-TDA30:
2.5.8 MEC Card (KX-TDA3105)
For KX-TDA100/KX-TDA200:
2.3.2 MEC Card (KX-TDA0105)
For KX-TDA600:
2.3.2 EMEC Card (KX-TDA6105)
Programming Manual References
None
Feature Guide References
None
Memory Version:
Indicates the hardware version of the EMEC or MEC card when it is mounted on the EMPR
or MPR card
(reference only).
Value Range
- (not mounted), 1–15
Maintenance Console Location
3.3 [1-1] Slot—Card Property - MPR
110 PC Programming Manual
3.3 [1-1] Slot—Card Property - MPR