Panasonic KX-TDA100 - 1-1] Slot-Port Property - IP-GW Port-Connection Command

3.35 [1-1] Slot—Port Property - IP-GW Port—
Connection Command
Commands for the IP-GW ports can be programmed.
INS
Puts the port in service.
Value Range
Not applicable.
Maintenance Console Location
3.35 [1-1] Slot—Port Property - IP-GW Port—Connection Command
Programming Manual References
3.34 [1-1] Slot—Port Property - IP-GW Port
Feature Guide References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the purpose of
repair.
Value Range
Not applicable.
Maintenance Console Location
3.35 [1-1] Slot—Port Property - IP-GW Port—Connection Command
Programming Manual References
3.34 [1-1] Slot—Port Property - IP-GW Port
Feature Guide References
None
PC Programming Manual 315
3.35 [1-1] Slot—Port Property - IP-GW Port—Connection Command