Panasonic KX-TDA100 - Page 314

Maintenance Console Location
3.34 [1-1] Slot—Port Property - IP-GW Port
Programming Manual References
None
Feature Guide References
None
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
• Click the desired cell in the column.
• Select the desired cell in the column, and then click Command.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
3.34 [1-1] Slot—Port Property - IP-GW Port
Programming Manual References
3.35 [1-1] Slot—Port Property - IP-GW Port—Connection Command
Feature Guide References
None
314 PC Programming Manual
3.34 [1-1] Slot—Port Property - IP-GW Port