Panasonic KX-TDA100 - 1-1] Slot-Port Property - Extension Port-Port Type View

3.7 [1-1] Slot—Port Property - Extension Port—Port
Type View
Displays the number of connected telephones and Cell Stations (CSs).
This screen can only be accessed in Interactive mode.
Type
Indicates the types of telephone (reference only).
Value Range
New-DPT (KX-DT300 series/KX-T7600
series DPTs), Old-DPT (DPTs other than KX-DT300 series/
KX-T7600 series), APT, SLT, DSS Console, VM, Other, CS, High-density CS, IP-EXT
Maintenance Console Location
3.7 [1-1] Slot—Port Property - Extension Port—Port Type View
Programming Manual References
3.5 [1-1] Slot—Port Property - Extension Port
Feature Guide References
None
Total Count
Indicates the
total number of each type of telephone and CS connected to the PBX (reference only). With the
KX-TDA30, CSs are counted on the basis of the number of extension ports to which they are connected; with
the KX-TDA100/KX-TDA200/KX-TDA600, CSs are counted on the basis of the number of CSIF ports in service
plus the number of extension ports to which CSs are connected.
Value Range
Not applicable.
Maintenance Console Location
3.7 [1-1] Slot—Port Property - Extension Port—Port Type View
Programming Manual References
3.5 [1-1] Slot—Port Property - Extension Port
3.8 [1-1] Slot—Port Property - CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Guide References
None
PC Programming Manual 127
3.7 [1-1] Slot—Port Property - Extension Port—Port Type View