Panasonic KX-TDA100

Feature Guide References
1.2.2.7 Log-in/Log-out
Malicious Call Identification (MCID)
• 4.8 [2-6-1] Numbering Plan
—Main—Features— MCID
Feature Guide References
1.21.1.9 Malicious Call Identification (MCID)
Manager Features
• 4.11 [2-7-1] Class of Service—COS Settings—Programming
& Manager— Manager
• 13.1 [11-1] Main—Password— Manager Password - PT Programming—Prog *1
Feature Guide References
2.2.6 Manager Features
Message Waiting
• 3.4 [1-1] Slot—Card Property - Extension Type—
SLT Power Supply (KX-TDA100/KX-TDA200/
KX-TDA600 only)
• 4.8 [2-6-1] Numbering Plan
—Main—Features— Message Waiting Set / Cancel / Call Back
• 4.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—
Message Waiting Set
• 4.17 [2-9] System Options
– Option 3—
Dial Tone—Distinctive Dial Tone
– Option 5—
SLT—Message Waiting Lamp Pattern (KX-TDA100/KX-TDA200/KX-TDA600 only)
• 5.22 [3-8-1] VM(DTMF) Group—System Settings— VM DTMF Command—Listening Message
• 6.1 [4-1-1] Wired Extension—Extension Settings—Option 8— SLT MW Mode (KX-TDA100/
KX-TDA200/KX-TDA600 only)
• 6.5 [4-1-4] Wired Extension—Flexible Button
— Type
• 6.13 [4-2-3] Portable Station—Flexible Button— Type
• 6.17 [4-3] DSS Console— Type
Feature Guide References
1.19.1 Message Waiting
Multiple Subscriber Number (MSN) Ringing Service
• 12.2 [10-2] DIL Table & Port Settings—DDI / DID / TIE / MSN
–
Distribution Method
– DDI/DID/TIE/MSN—Remove Digit
– DDI/DID/TIE/MSN—Additional Dial
• 12.6 [10-4] MSN Table
PC Programming Manual 893
14.2 Feature Programming References