Panasonic KX-TDA100 - 2-8-2] Ring Tone Patterns-Call from Doorphone

4.15 [2-8-2] Ring Tone Patterns—Call from
Doorphone
Different ring tone patterns can be selected for incoming doorphone calls depending on the doorphone port
that
the
calls originate from. A maximum of 8 Ring Tone Pattern Tables can be programmed, and any pattern
table can be selected for use by an extension.
Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming doorphone calls.
Value Range
Single, Double
, Triple, S-Double, Option 1, Option 2
Maintenance Console Location
4.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings
—Option 1—
Ring Pattern Table
6.10 [4-2-1] Portable Station—Extension Settings—Option 1— Ring Pattern Table
7.1 [5-1] Doorphone
Feature Guide References
1.1.3.2 Ring Tone Pattern Selection
1.17.1 Doorphone Call
PC Programming Manual 445
4.15 [2-8-2] Ring Tone Patterns—Call from Doorphone