Panasonic KX-TDA100

Feature Guide References
2.1.1 Extension Port Configuration
External Feature Access (EFA)
• 3.11 [1-1] Slot—Port Property - LCO Port—
Flash Time
• 3.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—
Flash Time
• 3.25 [1-1] Slot—Port Property - E1 Port— Flash Time
• 3.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)— Flash Time
• 3.31 [1-1] Slot—Port Property - DID Port— Flash Time
• 4.8 [2-6-1] Numbering Plan—Main—Features— External Feature Access
• 6.1 [4-1-1] Wired Extension—Extension Settings—Option 7— Flash Mode during CO Conversation
• 6.5 [4-1-4] Wired Extension—Flexible Button
— Type
• 6.10 [4-2-1] Portable Station—Extension Settings—Option 7— Flash Mode during CO Conversation
• 6.13 [4-2-3] Portable Station—Flexible Button— Type
• 6.17 [4-3] DSS Console— Type
• 9.5 [7-5] Miscellaneous— TRS Check after EFA
Feature Guide References
1.11.7 External Feature Access (EFA)
External Relay Control
• 3.41 [1-1] Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600
only)— Device Type
• 3.45 [1-1] Slot—Card Property - DPH type (KX-TDA30 only)— For Output (EIO)—Device Type
• 4.8 [2-6-1] Numbering Plan—Main—Features—
External Relay Access
• 4.11 [2-7-1] Class of Service—COS Settings—Optional Device
& Other Extensions—
External Relay
Access
• 7.6 [5-4] External Relay
Feature Guide References
1.17.10 External Relay Control
External Sensor
• 3.41 [1-1] Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600
only)
–
Input Signal Decision Time
– Input Signal Detection Reopening Time
• 3.45 [1-1] Slot—Card Property - DPH type (KX-TDA30 only)
– For Sensor (EIO)—Input Signal Decision Time
– For Sensor (EIO)—Input Signal Detection Reopening Time
• 4.4 [2-3] Timers & Counters—Miscellaneous—
External Sensor—Ring Duration
• 4.16 [2-8-3] Ring Tone Patterns—Call from Others— External Sensor—Ring Tone Pattern Plan 1–8
• 7.7 [5-5] External Sensor
Feature Guide References
1.17.9 External Sensor
PC Programming Manual 883
14.2 Feature Programming References