Panasonic KX-TDA100 Programming Manual

OGM Record / Clear / Playback
Specifies the feature number, available for manager extensions, used to record, clear, or play back a certain
OGM.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan—Main
Programming Manual References
7.4 [5-3-2] Voice Message—DISA Message
4.11 [2-7-1] Class of Service—COS Settings—Programming
& Manager—
Manager
Feature Guide References
1.17.5 Outgoing Message (OGM)
Single CO Line Access
Specifies the feature number used to make a trunk call using a certain trunk.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan
—Main
Programming Manual References
12.1 [10-1] CO Line Settings
Feature Guide References
1.5.5.3 Trunk Access
Parallel Telephone (Ring) Mode Set / Cancel
Specifies the feature number used to set or cancel an SLT connected in parallel with a DPT to ring when
receiving an incoming call.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan—Main
396 PC Programming Manual
4.8 [2-6-1] Numbering Plan—Main

Panasonic KX-TDA100 Specifications

General

System Capacity	Up to 128 extensions
VoIP Support	Yes, with optional cards
Digital Extensions	Yes
Analog Extensions	Yes
ISDN Support	Yes
Power Supply	AC 100-240 V, 50/60 Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Networking	Yes
Type	Hybrid IP PBX
Wireless Capability	Yes
Supported Extensions	Digital, Analog
Trunk Interfaces	Analog, ISDN
Voicemail Capacity	Optional, via voice processing cards