Panasonic KX-TDA100

2.6.10 Utility—T1/E1 Line Trace (for KX-TDA100/KX-TDA200/
KX-TDA600) / E1 Line Trace (for KX-TDA30)
Traces the sent and received signalling bits and dial numbers on the specified channel of the T1
(KX-TDA100/KX-TDA200/KX-TDA600
only) or E1 line. This utility is intended for use by dealers.
This option is only available at Installer level, and requires that the target card be set to INS status.
To view trace data
1. From the Utility menu, select T1/E1 Line Trace (for KX-TDA100/KX-TDA200/KX-TDA600) or E1 Line
Trace (for KX-TDA30).
2. From the Slot No drop-down list, select the target slot.
3. From the CH No drop-down list, select the target channel.
4. Click Start.
Trace information will be displayed. The information is automatically updated whenever the data being
monitored changes.
5. Click Stop to end the trace.
6. Select an option:
• Click Capture to save the displayed trace information.
Information is saved as a text-format file.
• Click Clear to erase the information.
78 PC Programming Manual
2.6.10 Utility—T1/E1 Line Trace (for KX-TDA100/KX-TDA200/KX-TDA600) / E1 Line Trace (for KX-TDA30)