Panasonic KX-TDA100

Other PBX Extension
Other PBX
extension numbers can be used to easily call extensions connected to PBXs at different locations
in a TIE line network. The leading numbers of all PBXs in the network that will be called should be entered in
this table. A maximum of 16 leading numbers can be programmed.
Dial
Specifies the leading extension number of the other PBX.
Value Range
Max. 3 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan
—Main
Programming Manual References
11.1 [9-1] TIE Table—
Leading Number
Feature Guide References
1.30.1 TIE Line Service
KX-T7710 (KX-TDA100/KX-TDA200/KX-TDA600
only)
The settings of the MESSAGE button and One-touch buttons on the KX-T7710 can be programmed.
Dial
Indicates the
DTMF tone dial required by the PBX to recognise it and dial the preprogrammed number for each
button (reference only).
Value Range
B: For MESSAGE button
A1: For One-touch button 1
A2: For One-touch button 2
A3: For One-touch button 3
A4: For One-touch button 4
A5: For One-touch button 5
A6: For One-touch button 6
A7: For One-touch button 7
A8: For One-touch button 8
Maintenance Console Location
4.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None
PC Programming Manual 419
4.8 [2-6-1] Numbering Plan—Main