Panasonic KX-TDA100

3.20 [1-1] Slot—Port Property
- T1 Port—Connection
Command (KX-TDA100/KX-TDA200/KX-TDA600
only)
Commands for the T1 channels can be programmed.
INS
Puts the channel in service.
Value Range
Not applicable.
Maintenance Console Location
3.20
[1-1] Slot—Port Property - T1 Port—Connection Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
3.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Guide References
None
OUS
Takes the
channel out of service. This enables a temporary non-use of the port, for example, for the purpose
of repair.
Value Range
Not applicable.
Maintenance Console Location
3.20 [1-1] Slot—Port Property - T1 Port—Connection Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
3.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Guide References
None
236 PC Programming Manual
3.20 [1-1] Slot—Port Property - T1 Port—Connection Command (KX-TDA100/KX-TDA200/KX-TDA600 only)