6.13 [4-2-3] Portable Station—Flexible Button
Each flexible
button can be customised to allow one-touch access to a certain feature. A maximum of 12 flexible
buttons can be customised for each PS. Select the desired PS from the Extension Number / Name list.
To copy values from one location to another, click the Copy to button.
For more information on flexible buttons, see "1.20.2 Flexible Buttons" in the Feature Guide.
Display Option—Key Setting
Type
Specifies the feature to be assigned to the flexible button.
Value Range
Not Stored, Loop CO, Single CO, Group CO, DSS, One-touch, ICD Group, Message Waiting, FWD/DND
(Both), FWD/DND (External), FWD/DND (Internal), Group Fwd (Both), Group Fwd (External), Group Fwd
(Internal), Account, Conference, Terminate, EFA, Charge, Call
Park, Log-in/Log-out, Hurry-up, Wrap-up, Time
Service, TRS Level Change, ISDN Service, CLIR, COLR, ISDN Hold, Time Service - Automatic/Manual,
Two-way Record, Two-way Transfer, LCS, Voice Mail Transfer, NDSS, CTI, PDN (KX-TDA100/KX-TDA200/
KX-TDA600 only), SDN (KX-TDA100/KX-TDA200/KX-TDA600 only)
Maintenance Console Location
6.13 [4-2-3] Portable Station—Flexible Button
Programming Manual References
6.14 [4-2-3] Portable Station—Flexible Button—Flexible button data copy
Feature Guide References
None
Parameter Selection (for Single CO)
Specifies the trunk to be accessed.
Value Range
For KX-TDA30:
1–54
For KX-TDA100/KX-TDA200:
1–128
For KX-TDA600:
1–640
Maintenance Console Location
6.13 [4-2-3] Portable Station—Flexible Button
PC Programming Manual 689
6.13 [4-2-3] Portable Station—Flexible Button
To Next Page
Loading...
Need help?
General
