Panasonic KX-TDA100 - Page 233

Feature Guide References
None
Receiving Caller ID from TIE
Specifies whether Caller ID information is received when the channel type is TIE.
Value Range
Yes, No
Maintenance Console Location
3.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
None
Ringback Tone to Outside Caller
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone. This
setting is only available when Channel Type on this screen is set to DDI/DID.
Value Range
Disable, Enable
Maintenance Console Location
3.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
None
Dial Tone to Extension
Enables the PBX to send a dial tone to an extension making a call when the network cannot send the tone.
Value Range
Disable, Enable
PC Programming Manual 233
3.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)