Panasonic KX-TDA100 - Page 240

Feature Guide References
None
RAI Signal Detection Mode
Selects the RAI signal detection mode.
Value Range
Type 1, Type 2
Maintenance Console Location
3.21 [1-1] Slot—Card Property - E1 type
Programming Manual References
None
Feature Guide References
None
DTMF Tone—DTMF Inter-digit Pause
Specifies the length of the DTMF inter-digit pause.
Value Range
64 + 16 ´ n (n=0–11) ms
Maintenance Console Location
3.21 [1-1] Slot—Card Property - E1 type
Programming Manual References
None
Feature Guide References
None
Pulse Dial—Pulse % Break
Specifies
the
% break for pulse digits. This is the ratio between the break (on-hook) signal and make (off-hook)
signal in a pulse dial.
Value Range
60 %, 67 %
240 PC Programming Manual
3.21 [1-1] Slot—Card Property - E1 type