Panasonic KX-TDA100 - Page 252

Feature Guide References
None
DSP Gain Adjustment—DTMF Receive
Specifies
the
strength range within which a DTMF signal must be for the DSP to recognise it as a DTMF signal.
Value Range
-42 - 0 dB – -11- 0 dB
Maintenance Console Location
3.22 [1-1] Slot—Card Property - E1 type—Line Signal Setting
Programming Manual References
None
Feature Guide References
None
DSP Gain Adjustment—MFC-R2 Transmit
Specifies the output power of MFC-R2 signals sent from the DSP.
Value Range
-31–0 dB
Maintenance Console Location
3.22 [1-1] Slot—Card Property - E1 type—Line Signal Setting
Programming Manual References
None
Feature Guide References
None
DSP Gain Adjustment—MFC-R2 Receive
Specifies the
strength range within which an MFC-R2 signal must be for the DSP to recognise it as an MFC-R2
signal.
Value Range
-38 - 0 dB – -23 - 0 dB
252 PC Programming Manual
3.22 [1-1] Slot—Card Property - E1 type—Line Signal Setting