Panasonic KX-TDA100 - Page 257

Programming Manual References
None
Feature Guide References
None
Group-l Code Assignment—End of Digit
Specifies the code used to recognise the end of each digit in an ANI number.
Value Range
Undefined, 1–15
Maintenance Console Location
3.23 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 1
Programming Manual References
None
Feature Guide References
None
Group-l Code Assignment—End of Digit Timer
Specifies the length of time that the PBX waits for further signal before detecting the end of digit of an ANI
number.
Value Range
1–15
Maintenance Console Location
3.23 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 1
Programming Manual References
None
Feature Guide References
None
Group-ll Code Assignment—G-ll Code Outgoing Call
Specifies the code for sending Group-ll code to the telephone company.
PC Programming Manual 257
3.23 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 1