Panasonic KX-TDA100 - Page 330

Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
3.40 [1-1] Slot—SIP-GW Port Property (KX-TDA30 only)
Programming Manual References
None
Feature Guide References
None
Subscriber Number
Specifies the number used as the CLIP number.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
3.39 [1-1] Slot—Card Property - SIP Gateway (KX-TDA30 only)
Programming Manual References
None
Feature Guide References
None
CLIR
Specifies whether to restrict the display of the CLIP number on the called party’s telephone when making a
public network trunk call.
Value Range
Yes, No
Maintenance Console Location
3.39 [1-1] Slot—Card Property - SIP Gateway (KX-TDA30 only)
Programming Manual References
None
330 PC Programming Manual
3.40 [1-1] Slot—SIP-GW Port Property (KX-TDA30 only)