Panasonic KX-TDA100 - Page 345

Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
3.45 [1-1] Slot—Card Property - DPH type (KX-TDA30 only)
Programming Manual References
3.46 [1-1] Slot—Card Property - DPH type—Connection Command (KX-TDA30 only)
Feature Guide References
None
For Output (EIO)—Device Type
Selects the type of connected output device (for output ports only).
Value Range
Relay, Ringer, Door Opener (DPH4 only)
Maintenance Console Location
3.45 [1-1] Slot—Card Property - DPH type (KX-TDA30 only)
Programming Manual References
None
Feature Guide References
1.17.2 Door Open
1.17.10 External Relay Control
For Sensor (EIO)—Input Signal Decision Time
Specifies the minimum duration of continuous input from the triggered sensor before the PBX recognises the
input and makes a sensor call.
Value Range
32 ´ n (n=2–255) ms
Maintenance Console Location
3.45 [1-1] Slot—Card Property - DPH type (KX-TDA30 only)
PC Programming Manual 345
3.45 [1-1] Slot—Card Property - DPH type (KX-TDA30 only)