Panasonic KX-TDA100 - Page 351

3. Click Confirm.
• If the de-registration is successful, the dialogue box will show "De-registration Succeed
".
• If the de-registration is unsuccessful, the dialogue box will show "De-registration Error". De-registration
will be terminated.
4. Click Close.
If the PS is successfully de-registered, the status of the PS will update to show "None".
Forced De-registration
Follow the steps below to forcibly de-register the PS when normal de-registration has been unsuccessful or
de-registration has been performed only on the PS.
1. Click Forced De-registration.
A dialogue box will appear. Registered extension numbers are displayed on the left.
2. Highlight numbers and click the right arrow to select them for forced de-registration. Click Next.
A dialogue box will appear.
3. Click OK.
A dialogue box will appear.
4. Click Confirm.
• If the de-registration is successful, the dialogue box will show "
Forced De-registration Succeed
".
5. Click Close.
Once the PS is successfully de-registered, the status of the PS will update to show "None".
Personal Identification Number
Specifies the Personal Identification Number (PIN) of the PBX, used to avoid registering a PS to the wrong
PBX.
Note that the same PIN should be entered at the PS, before the PS is registered to the PBX.
Value Range
4 digits (consisting of 0–9)
Maintenance Console Location
3.48 [1-2] Portable Station
Installation Manual References
For KX-TDA30:
2.7.7 Connecting a Cell Station to the PBX
2.8.7 Connecting a Cell Station to the PBX
2.9.7 Connecting a Cell Station to the PBX
For KX-TDA100/KX-TDA200
:
2.8.7 Connecting a Cell Station to the PBX
2.9.7 Connecting a Cell Station to the PBX
2.10.7 Connecting a Cell Station to the PBX
For KX-TDA600:
2.10.7 Connecting a Cell Station to the PBX
2.11.7 Connecting a Cell Station to the PBX
2.12.7 Connecting a Cell Station to the PBX
PC Programming Manual 351
3.48 [1-2] Portable Station