Panasonic KX-TDA100

Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Guide References
1.17.9 External Sensor
Incoming Call Inter-digit Timer—DDI / DID
Specifies the
length of time between digits when receiving a DDI/DID number from a public network. The call
will be redirected to a PBX operator when this timer expires.
Value Range
0–30 s
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
12.3 [10-3] DDI / DID Table
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Incoming Call Inter-digit Timer—TIE
Specifies the length of time between digits when receiving a dialled number from a TIE line. The call will be
redirected to a PBX operator when this timer expires.
Value Range
3–30 s
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
11.1 [9-1] TIE Table
Feature Guide References
1.30.1 TIE Line Service
380 PC Programming Manual
4.4 [2-3] Timers & Counters