Panasonic KX-TDA100 - Page 387

Value Range
Disable, Enable
Maintenance Console Location
4.6 [2-4] Week Table—Time Setting
Programming Manual References
None
Feature Guide References
2.2.3 Tenant Service
2.2.4 Time Service
2. Break—–Break 1–3 Start—Hour, Minute
Specifies the start time for each break period. Times can only be set when 2. Break—Break 1–3 Start—
Setting is set to Enable.
Value Range
00:00–23:59
Maintenance Console Location
4.6 [2-4] Week Table—Time Setting
Programming Manual References
None
Feature Guide References
2.2.3 Tenant Service
2.2.4 Time Service
2. Break—Break 1–3 End—Hour, Minute
Specifies the end time for each break period. Times can only be set when 2. Break—Break 1–3 Start—
Setting is set to Enable.
Value Range
00:00–23:59
Maintenance Console Location
4.6 [2-4] Week Table—Time Setting
PC Programming Manual 387
4.6 [2-4] Week Table—Time Setting