Panasonic KX-TDA100 - Page 411

Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan—Main
Programming Manual References
4.11 [2-7-1] Class of Service—COS Settings—Extension Feature
—
Executive Busy Override
4.11
[2-7-1] Class of Service—COS Settings—Programming & Manager—
Executive Busy Override Deny
Feature Guide References
1.8.2 Executive Busy Override
Not Ready (Manual Wrap-up) Mode On / Off
Specifies the feature number used to enter or leave Not Ready mode.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan—Main
Programming Manual References
5.13 [3-5-1] Incoming Call Distribution Group
—Group Settings
Feature Guide References
1.2.2.7 Log-in/Log-out
Log-in / Log-out
Specifies the feature number used to join or leave an incoming call distribution group.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan—Main
Programming Manual References
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings
PC Programming Manual 411
4.8 [2-6-1] Numbering Plan—Main