Panasonic KX-TDA100 - Page 440

Feature Guide References
1.17.6 Direct Inward System Access (DISA)
Remote Operation by Other Extension
Allows
the
Walking COS feature to be used from a remote location (inside the PBX, or outside the PBX using
DISA).
Value Range
Allow, Deny
Maintenance Console Location
4.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
COS
6.10 [4-2-1] Portable Station—Extension Settings—Main— COS
Feature Guide References
1.9.5 Walking COS
Accept Wireless XDP Parallel Mode Set by PS
Allows Wireless XDP Parallel Mode to be set by a PS.
Value Range
Allow, Deny
Maintenance Console Location
4.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Main— COS
Feature Guide References
1.25.5 Wireless XDP Parallel Mode
Miscellaneous
COS Name
Specifies the name of the COS.
Value Range
Max. 20 characters
440 PC Programming Manual
4.11 [2-7-1] Class of Service—COS Settings