Panasonic KX-TDA100 - Page 456

Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
None
CODEC—Network CODEC (KX-TDA100/KX-TDA200/KX-TDA600 only)
Selects the CODEC type for ISDN or T1/E1 lines.
Value Range
A-Law, µ-Law
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
None
ISDN en Bloc Dial—[#] as End of Dial for en Bloc mode
Specifies whether to automatically send "#" as an end code when dialling to an ISDN line; if used as the end
code, "#" will not be dialled out as part of a number even when the "#" key is pressed.
Value Range
Disable, Enable
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
3.14 [1-1] Slot—Port Property - BRI Port—ISDN CO— ISDN Outgoing Call Type
3.16
[1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting—
ISDN
Outgoing Call Type
Feature Guide References
1.21.1.1 Integrated Services Digital Network (ISDN)
—SUMMARY
456 PC Programming Manual
4.17 [2-9] System Options