Programming Manual References
11.1 [9-1] TIE Table— Leading Number
Feature Guide References
1.30.1 TIE Line Service
System Wireless—Out of Range Registration
Selects whether
the PBX can set the status of a PS to Out of Range if no signal is received from the PS for a
preset length of time. This feature must be enabled to allow PS roaming.
Value Range
Disable, Enable
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
4.4 [2-3] Timers & Counters—
System Wireless—PS Out of Range Timer
Feature Guide References
1.30.6.1 PS Roaming by Network ICD Group
System Wireless—SDN Delayed Ringing with LCD (KX-TDA100/KX-TDA200/
KX-TDA600 only)
Selects whether
call information (such as Caller ID) is shown on the display of a PDN extension PS (i.e., a PS
with one or more PDN buttons) when a call is received while delayed ringing is set.
Value Range
Disable, Enable
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
6.13 [4-2-3] Portable Station—Flexible Button—
Parameter Selection (for SDN) (KX-TDA100/
KX-TDA200/KX-TDA600 only)
Feature Guide References
1.7.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension
PC Programming Manual 469
4.17 [2-9] System Options
To Next Page
Loading...
