Panasonic KX-TDA100 - Page 476

Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
None
CTI Multi PBX Control—USB Serial Number
Specifies the serial number assigned to this PBX’s USB data transfers, used when multiple PBXs are
connected via USB to one PC (for example, for CTI).
Value Range
1–8
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
None
CTI Make Call—SLT Ring
Specifies whether to ring an SLT when a call is made from CTI, instead of the SLT.
Value Range
Disable, Enable
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
None
476 PC Programming Manual
4.17 [2-9] System Options