Tone Detection
Group Name
Specifies the name of the trunk group for programming reference.
Value Range
Max. 20 characters
Maintenance Console Location
5.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
12.1 [10-1] CO Line Settings
Feature Guide References
None
DISA Tone Detection—Silence
Enables the disconnection of a DISA-originated trunk-to-trunk call by silence detection.
Value Range
Disable, Enable
Maintenance Console Location
5.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
7.3 [5-3-1] Voice Message—DISA System
12.1 [10-1] CO Line Settings
Feature Guide References
1.17.6 Direct Inward System Access (DISA)
DISA Tone Detection—Continuous
Enables the disconnection of a DISA-originated trunk-to-trunk call by continuous signal detection.
Value Range
Disable, Enable
Maintenance Console Location
5.1 [3-1-1] Trunk Group—TRG Settings
PC Programming Manual 491
5.1 [3-1-1] Trunk Group—TRG Settings
To Next Page
Loading...
