Panasonic KX-TDA100 - Page 495

Maintenance Console Location
5.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
None
Feature Guide References
None
Collect Call Reject (for Brazil)—Wait Time
Selects the length of time that the PBX waits before sending a flash signal to reject a collect call. This setting
is only for users in Brazil.
Value Range
500 ms, 1000 ms, 1500 ms, 2000 ms
Maintenance Console Location
5.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
None
Feature Guide References
None
Collect Call Reject (for Brazil)—Flashing Time
Selects the
length of the flash signal that the PBX sends to reject a collect call. This setting is only for users in
Brazil.
Value Range
1000 ms, 1500 ms, 2000 ms, 2500 ms
Maintenance Console Location
5.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
None
Feature Guide References
None
PC Programming Manual 495
5.1 [3-1-1] Trunk Group—TRG Settings