Panasonic KX-TDA100 - Page 576

CLIP ID
Specifies the CLIP number sent to the public network to show on the called party’s telephone display when
making a trunk call.
Value Range
Max. 16 digits (consisting of 0–
9, *, and #)
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
CLIP on Extension/CO
Selects the CLIP number to show on the called party
’s telephone.
Value Range
Extension: Show the CLIP number specified in CLIP ID on the Option 1 tab.
CO: Show the CLIP number specified in Subscriber Number in 3.14 [1-1] Slot—Port Property - BRI
Port or 3.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
.
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
3.14 [1-1] Slot—Port Property - BRI Port—ISDN CO—
Subscriber Number
3.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting—
Subscriber Number
6.1 [4-1-1] Wired Extension—Extension Settings—ISDN CLIP—
CLIP ID
Feature Guide References
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
CLIR
Specifies whether to restrict the display of the CLIP number on the called party’s telephone when making a
public network trunk call.
Value Range
Disable, Enable
576 PC Programming Manual
6.1 [4-1-1] Wired Extension—Extension Settings