Panasonic KX-TDA100 - Page 721

6.17 [4-3] DSS Console—Display Option—Key Setting— Parameter Selection (for Time Service -
Automatic/Manual)
6.17 [4-3] DSS Console—Display Option
—Key Setting— Parameter Selection (for SDN) (KX-TDA100/
KX-TDA200/KX-TDA600 only)
Feature Guide References
None
Parameter 2
This parameter is equivalent to Optional Parameter (Ringing Tone Type Number) on the Key Setting
screen.
Maintenance Console Location
6.17 [4-3] DSS Console
Programming Manual References
6.17 [4-3] DSS Console—Display Option—Key Setting— Optional Parameter (Ringing Tone Type
Number) (for Time Service)
6.17 [4-3] DSS Console—Display Option
—Key Setting— Optional Parameter (Ringing Tone Type
Number) (for Loop CO, Single CO, Group CO, ICD Group, SDN)
6.17 [4-3] DSS Console—Display Option
—Key Setting—
Optional Parameter (Ringing Tone Type
Number) (for Call Park)
Feature Guide References
None
Mailbox Number
This parameter is equivalent to Ext No. of Mailbox on the Key Setting screen.
Maintenance Console Location
6.17 [4-3] DSS Console
Programming Manual References
6.17 [4-3] DSS Console—Display Option—Key Setting—
Ext No. of Mailbox (for Two-way Transfer)
Feature Guide References
None
Label
Specifies the label that will be printed next to the corresponding button.
PC Programming Manual 721
6.17 [4-3] DSS Console