Panasonic KX-TDA100 - Page 801

Value Range
100 ´ n (n=0–30) ms
Maintenance Console Location
11.2 [9-2] Network Data Transmission
Programming Manual References
None
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
Network MSW Data Transmission for Centralised VM Feature—Data
Re-transmission : Repeat Counter
Specifies the number of times re-transmission of network message waiting notifications is repeated before
being cancelled.
Value Range
0–10
Maintenance Console Location
11.2 [9-2] Network Data Transmission
Programming Manual References
11.1 [9-1] TIE Table— Enhanced QSIG Call Information (Optional SD Card Required)
Feature Guide References
1.30.5.2 Centralised Voice Mail
Network MSW Data Transmission for Centralised VM Feature—Data
Re-transmission : Repeat Timer
Specifies the length of time between repeated re-transmission of network message waiting notifications.
Value Range
10–240 s
Maintenance Console Location
11.2 [9-2] Network Data Transmission
PC Programming Manual 801
11.2 [9-2] Network Data Transmission