Panasonic KX-TDA100

Caller ID
• 4.4 [2-3] Timers & Counters—Miscellaneous
–
Caller ID—Waiting to receive
– Caller ID—Visual Caller ID Display
• 4.17 [2-9] System Options—Option 4—
Private Network—Public Call through Private Network—
Minimum Public Caller ID Digits
• 4.18 [2-10] Extension CID Settings
• 5.1 [3-1-1] Trunk Group—TRG Settings—Main—
Caller ID Modification Table
• 5.3 [3-1-3] Caller ID Modification
• 6.1 [4-1-1] Wired Extension—Extension Settings—Option 8
– Extension Caller ID Sending
– Incoming Call Wait Timer for Extension Caller ID
• 8.1 [6-1] System Speed Dial
Feature Guide References
1.18.1 Caller ID
Calling Line Identification (CLI) Distribution
• 8.1 [6-1] System Speed Dial
–
Name
–
CO Line Access Number + Telephone Number
– CLI Destination
• 12.2 [10-2] DIL Table & Port Settings—CLI for DIL— CLI Ring for DIL—Day, Lunch, Break, Night
• 12.3 [10-3] DDI / DID Table— CLI Ring for DDI/DID—Day, Lunch, Break, Night
• 12.6 [10-4] MSN Table— CLI Ring for MSN—Day, Lunch, Break, Night
Feature Guide References
1.1.1.5 Calling Line Identification (CLI) Distribution
Calling Party Control (CPC) Signal Detection
• 3.11 [1-1] Slot—Port Property - LCO Port—
CPC Signal Detection Time—Outgoing, Incoming
• 3.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
– CPC Signal Detection (DDI/DID)—Outgoing, Incoming
– CPC Signal Detection (LCO/GCO)—Outgoing, Incoming
• 3.25 [1-1] Slot—Port Property - E1 Port— CPC Detection Time—Out, In
• 3.31 [1-1] Slot—Port Property - DID Port— CPC Detection Time—Out (DID), In (DID)
Feature Guide References
1.11.10 Calling Party Control (CPC) Signal Detection
Calling/Connected Line Identification Presentation (CLIP/COLP)
• 3.14 [1-1] Slot—Port Property - BRI Port
– ISDN CO—
Subscriber Number
874 PC Programming Manual
14.2 Feature Programming References