Panasonic KX-TDA100

• 3.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
– Dialling Mode
– DTMF Width
– CO Pulse Speed
• 3.31 [1-1] Slot—Port Property - DID Port
– Dialling Mode
– DTMF Width
–
CO Pulse Speed
Feature Guide References
1.5.4.4 Dial Type Selection
Direct In Line (DIL)
• 12.2 [10-2] DIL Table & Port Settings—DIL
–
DIL Destination—Day, Lunch, Break, Night
– Tenant Number
– VM Trunk Group No.
Feature Guide References
1.1.1.2 Direct In Line (DIL)
Direct Inward Dialling (DID)/Direct Dialling In (DDI)
• 3.30 [1-1] Slot—Card Property - DID type
• 4.4 [2-3] Timers & Counters—Miscellaneous
— Incoming Call Inter-digit Timer—DDI / DID
• 12.2 [10-2] DIL Table & Port Settings—DDI / DID / TIE / MSN
– Distribution Method
– DDI/DID/TIE/MSN—Remove Digit
– DDI/DID/TIE/MSN—Additional Dial
• 12.3 [10-3] DDI / DID Table
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Direct Inward System Access (DISA)
• 4.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
–
DISA—Delayed Answer Timer
– DISA—Mute & OGM Start Timer after answering
– DISA—No Dial Intercept Timer
–
DISA—2nd Dial Timer for AA
– DISA—Intercept Timer—Day, Lunch, Break, Night
– DISA—Disconnect Timer after Intercept
– DISA—CO-to-CO Call Prolong Counter
– DISA—CO-to-CO Call Prolong Time
– DISA—Progress Tone Continuation Time before Recording Message
PC Programming Manual 879
14.2 Feature Programming References