Panasonic KX-TDA100

• 6.10 [4-2-1] Portable Station—Extension Settings—Main— User Group
• 7.1 [5-1] Doorphone— Tenant Number
• 7.7 [5-5] External Sensor—
Tenant No.
• 8.6 [6-6] Tenant
• Section 10 [8] ARS
• 10.6 [8-5] Carrier—Authorisation Code for Tenant
• 12.2 [10-2] DIL Table & Port Settings—DIL— Tenant Number
• 12.3 [10-3] DDI / DID Table— Tenant Number
• 12.6 [10-4] MSN Table—MSN— Tenant Number
Feature Guide References
2.2.3 Tenant Service
Three-party Conference (3PTY)—by ISDN
• 3.14 [1-1] Slot—Port Property - BRI Port—Supplementary Service—
COLP, CLIR, COLR, CNIP,
CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY
• 3.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Supplementary
Service—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D,
AOC-E, 3PTY
Feature Guide References
1.21.1.8 Three-party Conference (3PTY)—by ISDN
TIE Line Service
• 3.14 [1-1] Slot—Port Property - BRI Port—Network Numbering Plan
—
Trunk Property
• 3.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Network
Numbering Plan
—
Trunk Property
• 3.19 [1-1] Slot—Port Property - T1 Port
(KX-TDA100/KX-TDA200/KX-TDA600 only)—
Trunk Property
• 3.25 [1-1] Slot—Port Property - E1 Port—
Trunk Property
• 3.28
[1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—
Trunk Property
• 4.4 [2-3] Timers & Counters—Miscellaneous— Incoming Call Inter-digit Timer—TIE
• 4.8 [2-6-1] Numbering Plan—Main—Features
– Idle Line Access (Local Access)
– Trunk Group Access
– TIE Line Access
• 4.8 [2-6-1] Numbering Plan—Main—Other PBX Extension
• 4.9
[2-6-2] Numbering Plan—Quick Dial—
Use quick dial for rerouting to public CO when TIE line does
not work
• 4.11 [2-7-1] Class of Service—COS Settings—TRS—
TRS Level—Day, Lunch, Break, Night
• 4.17 [2-9] System Options—Option 4—
Private Network—TIE Call by Extension Numbering (Optional
SD Card Required)
• 5.1 [3-1-1] Trunk Group—TRG Settings—Main—
COS
• 11.1 [9-1] TIE Table
• 12.2 [10-2] DIL Table & Port Settings
– DIL— Trunk Property
– DIL— DIL Destination—Day, Lunch, Break, Night
PC Programming Manual 903
14.2 Feature Programming References