Panasonic KX-TDA100

– Parameter Selection (for Single CO)
– Parameter Selection (for Group CO)
• 6.13 [4-2-3] Portable Station—Flexible Button
– Type
–
Parameter Selection (for Single CO)
– Parameter Selection (for Group CO)
• 6.17 [4-3] DSS Console
– Type
– Parameter Selection (for Single CO)
– Parameter Selection (for Group CO)
• 10.1 [8-1] System Setting— ARS Mode
• 12.1 [10-1] CO Line Settings— CO Name
Feature Guide References
1.5.5.3 Trunk Access
Trunk Answer From Any Station (TAFAS)
• 4.8 [2-6-1] Numbering Plan
—Main—Features— TAFAS Answer
• 4.19 [2-11-1] Audio Gain—Paging/MOH
– Paging—EPG 1 (External Pager 1) (KX-TDA100/KX-TDA200/KX-TDA600 only)
– Paging—EPG 2 (External Pager 2) (KX-TDA100/KX-TDA200/KX-TDA600 only)
– Paging—EPG (External Pager) (KX-TDA30 only)
• 7.2 [5-2] External Pager
Feature Guide References
1.17.3 Trunk Answer From Any Station (TAFAS)
Trunk Busy Out
• 3.11 [1-1] Slot—Port Property - LCO Port—
Busy Out Status
• 4.8 [2-6-1] Numbering Plan—Main—Features— Busy Out Cancel
• 4.11 [2-7-1] Class of Service—COS Settings—Programming & Manager— Manager
• 4.17 [2-9] System Options—Option 4—
Busy Out—Busy Out for Analogue CO
Feature Guide References
1.5.4.6 Trunk Busy Out
Trunk Call Limitation
• 4.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—
Extension-CO Line Call Duration Limit
• 4.17 [2-9] System Options—Option 2— Extension - CO Call Limitation—For Incoming Call
• 5.1 [3-1-1] Trunk Group—TRG Settings—Main
– CO-CO Duration Time
– Extension-CO Duration Time
• 9.5 [7-5] Miscellaneous— Dial Digits Limitation After Answering—Dial Digits
906 PC Programming Manual
14.2 Feature Programming References