To Next PageTo Next PageWhy aren't the paralleled single line telephones ringing on my Panasonic PBX?
If the paralleled single line telephones do not ring on your Panasonic PBX, 'No ring' may be selected. Change the setting to ring.
What if my Panasonic KX-TDA600 PBX proprietary telephone doesn't have a feature button?
If your proprietary Panasonic PBX telephone does not have a feature button, it may be because some models do not have the feature button. Change a flexible button to the desired button. Enter the specified feature number instead of the feature button.
Why doesn't my Panasonic PBX proprietary telephone work even after following instructions?
If, even after following the manual instructions, none of the operations work when using a proprietary telephone on your Panasonic PBX, the Intercom line was not seized. The seized line, when going off-hook, was changed by personal setting. If the setting has been changed, press the INTERCOM or PDN button after going off-hook and follow the instructions.
What to do if I cannot remember Panasonic KX-TDA600 PBX feature numbers?
If you cannot remember the feature numbers for your Panasonic PBX, write the new feature numbers in the table in '4.2.1 Feature Number Table' if they have been changed from the default values. You can also ask your dealer to change the feature numbers for easier use.
Why doesn't my Panasonic PBX telephone work with personal settings?
If your Panasonic PBX telephone does not work using the personal settings or with other settings (One-touch dialing, forwarding destination, etc.), the previous telephone's settings have not been cleared. Clear the settings and then program your desired settings again.
What to do if Panasonic KX-TDA600 telephone buttons are not responding?
If your Panasonic PBX telephone does not respond when buttons are pressed, the telephone is locked, so unlock it. Alternatively, your telephone might be connected to an eXtra Device Port, and system programming is required, so consult your dealer.
Why do some Panasonic KX-TDA600 PBX features not work?
If some features on your Panasonic PBX do not work, system management may be restricting certain features, so consult your manager. It is also possible that the feature numbers have changed. Confirm the revised number and try again.
General| Type | Hybrid PBX |
|---|---|
| VoIP Support | Yes |
| DECT Support | Yes |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Wireless Capability | Yes |
| Built-in Features | Voicemail, Call Forwarding, Call Waiting, Caller ID, Conference Calling |
| Supported Protocols | SIP, H.323 |
