15.1. Power Supply Circuit
As indicated below, the various voltages are supplied to each block.
V_PA, about 4.0V at Base Unit or 3.3V at Handset, is supplied to the Power amplifier in 5.8GHz PA circuit.
IC841 is 3.0V Regulators, and IC761 is a 2.5V Regulator. They output Vcc_5.8GHz, and Vcc_2.4GHz respectively by order of
RADIO_EN signal or CON_EN signal. V_RF is approximately 4.0V (Base Unit) or 3.6V (Handset).
69
KX-TG5631S / KX-TG5632M / KX-TG5633B / KX-TGA560S / KX-TGA560M / KX-TGA560B
To Next Page
Loading...
